Phase b tap

Connects phase b of a 3-phase plug to a single-phase pin.

  • electrical
  • 3-phase
  • Modelica Standard Library
  • 2 ports
BlockPhase b tapKindphaseBLibrary3-phase

Description

Taps phase b of a three-phase plug as a single-phase pin, so single-phase blocks can connect to it. The other phases carry no current through this block.

Example

Three-phase loads A 10 V three-phase supply into a resistive star load, a series R–L star load, and a capacitor bank in delta.

10 V 50 HzStar supplyGround supplyStar (R)Ground (R)Star (R–L)Ground (R–L)PowerCurrents (R)R 10 ΩR 10 Ω (R–L)Currents (R–L)L 31.8 mHCurrents (C)C 100 µFDeltaPhase aPhase bPhase cv av bv cGround aGround bGround c
In Gradara, select a Phase b tap block and press F1, then choose Open example. It opens as a new model in My models, ready to run.

Also in this example:Voltage sensorGround3-phase AC source3-phase resistor3-phase inductor3-phase capacitorStar pointDelta connectionPhase a tapPhase c tap3-phase current sensor3-phase power sensor

Ports

Conserving terminals 2

  • abcplug_p3-phase

    Three-phase plug (phases a, b, c).

  • bpin_pelectrical

    Single-phase pin at the potential of phase b.

Equations

Modelica
pin_p.v = plug_p.b.v
plug_p.b.i = −pin_p.i, plug_p.a.i = plug_p.c.i = 0

Implementation

Modelica Standard Library 4.1.0Modelica.Electrical.Polyphase.Basic.PlugToPin_p
MSL documentation

See also

Select a block in Gradara and press F1 to open its page offline.