Controlled 3-phase voltage
Three phase voltages equal to the three input signals, from abc− to abc: an ideal (averaged) voltage-source inverter.
- signal
- 3-phase
- Modelica Standard Library
- 5 ports
threePhaseSignalVoltageLibrary3-phaseDescription
Three controlled voltage sources, one per phase, each equal to its input signal (the Modelica library polyphase signal voltage). Phase k acts between phase k of plug_n and phase k of plug_p.
It is the ideal model of a voltage-source inverter: the averaged output without switching ripple, dead time, or a DC-bus limit. Use it with Inverse Clarke transform in a field-oriented drive.
Example
Clarke and Park transforms Balanced three-phase signals become a rotating α, β pair, then constant d and q, and go back out through a controlled three-phase source.
Also in this example:ConstantSine waveClockGainClarke transformPark transformInverse Clarke transformGround3-phase resistorStar point3-phase current sensor
Ports
Inputs 3
-
a
vaPhase a voltage command, in volts.
-
b
vbPhase b voltage command, in volts.
-
c
vcPhase c voltage command, in volts.
Conserving terminals 2
-
abc
plug_pThree-phase output plug (phases a, b, c).
-
abc−
plug_nThree-phase return plug: the negative terminal of each phase source. Connect a Star point to it for a neutral.
Equations
plug_p.k.v − plug_n.k.v = vk for k = a, b, c
Implementation
Modelica.Electrical.Polyphase.Sources.SignalVoltageAssumptions and limitations
- Ideal: no internal impedance, no switching, no limit on the voltage it can produce. Limit the commands upstream (the current controllers’ limits, or Saturation) to model a finite DC bus.
Tips
- Ground the star point on plug_n; the machine’s star point on plug_sn can share it.
Used in
These larger examples use it too. Open them from Examples in the app.
- PMSM · Field-oriented control
See also
Select a block in Gradara and press F1 to open its page offline.